VapeCon starter kits deals and bundles in Austria (v6)
VapeCon starter kits advice for Austria, covering strength guide, what to look for and where the trade-offs actually sit.
Local availability in Austria shapes the practical answer more than the marketing does. Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below.
Finding the right vapecon starter kits in Austria is easier than most catalogues make it sound. In Austria, availability of the 0.6 Ω mesh coil is the practical bottleneck, not the device itself.
Charging over Micro-USB takes about 66 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Micro-USB socket on the base and whether the 0.6 Ω mesh coil is the newer generation. Battery behaviour is where the Smok Morph earns its keep: the 2000 mAh cell holds a usable charge for most of a day at 60 and recharges over Micro-USB.
For flavour seekers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 50:50 PG/VG blend, so if you prefer a smoother draw, mix accordingly.
The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1204 full puffs from a charge at 20 mg/ml, based on average session length in our testing. Delivery across Austria is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window.
Replacement coils are widely available, and the 0.6 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 0.6 Ω mesh coil changes the draw character compared with the 50:50 PG/VG liquid sitting in the chamber.
Vapour production is more than adequate at 60, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Smok Morph |
|---|---|
| Brand family | Lost Vape |
| Battery capacity | 2000 mAh |
| Power range | 60 W |
| Liquid capacity | 2.0 ml |
| Coil | 0.6 Ω mesh |
| Bottle size | 1.3 ml |
| Liquid ratio | 50:50 PG/VG |
| Nicotine strength | 20 mg/ml |
| Material | anodised aluminium |
| Charge port | Micro-USB |
| Connector | 510 bottom pin |
| Airflow | adjustable sliding |
| Mouthpiece | wide bore |
Flavour and performance notes
A representative profile is Blue Raspberry Frost: sweet, tangy, described as sharp blue raspberry with a long cold finish. On a 50:50 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.
Practical considerations in Austria
Availability in Austria is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and EUR rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.
